Tool Accessories & Storage

This Groco ARG-1000 Series 1" Raw Water Strainer w/Non- Metallic Plastic Basket is a prime choice for your home's raw water filtration system. These Camping Gear Accessories by GROCO feature a non-metallic cap that magnifies the internal filter for easy monitoring. The Groco ARG-1000 Series 1 inch Raw Water Strainer also has an improved drain plug that allows you to thoroughly drain your system when needed. What's more, the Groco ARG-1000 1in Raw Water Strainer is UL listed for use in dry systems. If you need to replace your current raw water strainer, look no further than the Groco ARG-1000 Series 1in Raw Water Strainer w/Basket.

Specifications for GROCO ARG-1000 Series 1" Raw Water Strainer w/Non-Metallic Plastic Basket:

Features of GROCO ARG-1000 Series 1" Raw Water Strainer w/Non-Metallic Plastic Basket

• Mounting System Allows Removal Without ToolsBonding Connection Both SidesO-Ring Seal All Joining SurfacesFilter Basket Options: #304 SS (Standard) Monel & Non-MetallicOne-Piece Molded Sight Glass Eliminates Tie Rods and GasketsImproved Drain PlugNon-Metallic Cap Magnifies Internal ViewingNPT or BSPP Threaded PortsImproved Basket DesignC84400 bronze head castingUL Listed 255-D

Package Contents:

• GROCO ARG-1000 Series 1" Raw Water Strainer w/Non-Metallic Plastic Basket

1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting

Specifications for GROCO 1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting:

Features of GROCO 1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting

• Full Flow
• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting

1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting

Specifications for GROCO 1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting:

Features of GROCO 1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting

• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 5"
• Standard Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting

1/2" NPT 90 Bronze Fuel Valve

Specifications for GROCO 1/2" NPT 90 Bronze Fuel Valve:

Features of GROCO 1/2" NPT 90 Bronze Fuel Valve

• Compact design
• 90 flow path
• 1/2" NPT male and female ports
• Use FV-590 (Brass) for fiberglass tanks
• Use FV-590-S (316SS) with aluminum or stainless steel tanks

Package Contents:

• GROCO 1/2" NPT 90 Bronze Fuel Valve

1/4" NPT #316 Stainless Steel In-Line Ball Valve

Specifications for GROCO 1/4" NPT 316 Stainless Steel In-Line Ball Valve:

Features of GROCO 1/4" NPT 316 Stainless Steel In-Line Ball Valve

• 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining
• Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves)
• Thumb-release locking mechanism assures the valve remains in the position selected
• 1000 WOG rated
• #316 SS body
• #304 SS handle and trim
• Bonding attachment
• PTFE seats and seals
• UL listed for fuel or water
• Full flow
• Fits IBVF-S for Seacock Application

Package Contents:

• GROCO 1/4" NPT 316 Stainless Steel In-Line Ball Valve

1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight Fitting

Specifications for GROCO 1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight Fitting:

Features of GROCO 1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight Fitting

• Full Flow
• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight Fitting

1/2" NPT x 3/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

Specifications for GROCO 1/2" NPT x 3/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting:

Features of GROCO 1/2" NPT x 3/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

• 90 degree Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• Full Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1/2" NPT x 3/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

1/2" NPT 90 Stainless Steel Fuel Valve

Specifications for GROCO 1/2" NPT 90 Stainless Steel Fuel Valve:

Features of GROCO 1/2" NPT 90 Stainless Steel Fuel Valve

• Compact design
• 90 flow path
• 1/2" NPT male and female ports
• Use FV-590 (Brass) for fiberglass tanks
• Use FV-590-S (316SS) with aluminum or stainless steel tanks

Package Contents:

• GROCO 1/2" NPT 90 Stainless Steel Fuel Valve

1-1/2" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.

Specifications for GROCO 1-1/2" Bronze NPS to NPT Flange Adapter:

Features of GROCO 1-1/2" Bronze NPS to NPT Flange Adapter

• Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls
• Accept standard thru-hulls into the base and standard in-line valves on top
• Provide a safe and sturdy assembly when in-line valves are used as seacocks
• For OEMs prevent valve damage during engine or generator installation - the valve can be installed later
• Simplifies future valve replacement
• C83600 Bronze and #316 SS models

Package Contents:

• GROCO 1-1/2" Bronze NPS to NPT Flange Adapter

1" NPS NPT Combo Bronze Thru-Hull Fitting with Nut

Specifications for GROCO 1" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut:

Features of GROCO 1" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut

• NPSM / NPT combination thread
• C83600 Bronze
• Sizes from 1/2" to 5"
• UL Listed 647B
• Available with (-W) or without nut (-L)
• BSPP and Stainless Steel models available

Package Contents:

• GROCO 1" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut

3/4" Fresh Water Strainer w/#304 SS Basket

Specifications for GROCO 3/4" Fresh Water Strainer w/ 304 SS Basket:

Features of GROCO 3/4" Fresh Water Strainer w/ 304 SS Basket

• Protect fresh water pumps from debris. White nylon strainer head and clear plastic sight glass. Glass unscrews for filter basket cleaning. Mount bracket included. Use WSB for fresh-water systems (#304 SS basket)

Package Contents:

• GROCO 3/4" Fresh Water Strainer w/ 304 SS Basket

ARG-1500 Series 1-1/2" Raw Water Strainer with Non-Metallic Plastic Basket

Specifications for GROCO ARG-1500 Series 1-1/2" Raw Water Strainer w/Non-Metallic Plastic Basket:

Features of GROCO ARG-1500 Series 1-1/2" Raw Water Strainer w/Non-Metallic Plastic Basket

• Mounting System Allows Removal Without ToolsBonding Connection Both SidesO-Ring Seal All Joining SurfacesFilter Basket Options: #304 SS (Standard) Monel & Non-MetallicOne-Piece Molded Sight Glass Eliminates Tie Rods and GasketsImproved Drain PlugNon-Metallic Cap Magnifies Internal ViewingNPT or BSPP Threaded PortsImproved Basket DesignC84400 bronze head castingUL Listed 255-D

Package Contents:

• GROCO ARG-1500 Series 1-1/2" Raw Water Strainer w/Non-Metallic Plastic Basket

3/4" NPT x 1" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

Specifications for GROCO 3/4" NPT x 1" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting:

Features of GROCO 3/4" NPT x 1" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

• 90 degree Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• Full Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 3/4" NPT x 1" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

1-1/2" Bronze High Speed Thru-Hull Fitting w/Nut

Specifications for GROCO 1-1/2" Bronze High Speed Thru-Hull Fitting w/Nut:

Features of GROCO 1-1/2" Bronze High Speed Thru-Hull Fitting w/Nut

• Designed for increased flow compared to standard Thru Hulls and with less drag
• NPSM / NPT combination thread
• C83600 Bronze

Package Contents:

• GROCO 1-1/2" Bronze High Speed Thru-Hull Fitting w/Nut

3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight Fitting

Specifications for GROCO 3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight Fitting:

Features of GROCO 3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight Fitting

• Full Flow
• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight Fitting

1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut

Specifications for GROCO 1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut:

Features of GROCO 1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

• NPSM / NPT combination thread
• #316 Stainless Steel
• Sizes from 1/2" to 3"
• UL Listed 647B
• BSPP and Stainless Steel models available

Package Contents:

• GROCO 1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

3/4" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.

Specifications for GROCO 3/4" Bronze NPS to NPT Flange Adapter:

Features of GROCO 3/4" Bronze NPS to NPT Flange Adapter

• Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls
• Accept standard thru-hulls into the base and standard in-line valves on top
• Provide a safe and sturdy assembly when in-line valves are used as seacocks
• For OEMs prevent valve damage during engine or generator installation - the valve can be installed later
• Simplifies future valve replacement
• C83600 Bronze and #316 SS models

Package Contents:

• GROCO 3/4" Bronze NPS to NPT Flange Adapter

3/4" 90 Degree Hose Thru-Hull Fitting

Specifications for GROCO 3/4" 90 Degree Hose Thru-Hull Fitting:

Features of GROCO 3/4" 90 Degree Hose Thru-Hull Fitting

• 90 Degree Barb
• #316 Stainless Steel Thru Hull with Bronze Hose Connection
• UL Listed 647B

Package Contents:

• GROCO 3/4" 90 Degree Hose Thru-Hull Fitting

The Groco Thru-Hull Combo Fitting with Nut features an NPSM / NPT combination thread and are ideal for hoses with hose diameters of 1" to 3". The reusable Flow-Tel Thru-Hull Nut and NPSM / NPT combination thread make the Groco Thru-Hull Coupling Fittings a necessary item for nearly any boat. These Thru-Hull Fittings make it simple to add a hose to any boat. The fittings eliminate the need for cleaning and maintaining separate hoses. They can be installed and removed with hand tools, an electric drill, or an alternative method of installation. The NPSM (National Petroleum Storage and Transportation Act) thread on this Groco Thru-Hull Fitting w/Nut is constructed of corrosion-resistant #316 stainless steel. Stainless steel models with nuts and lugs are the only type of fittings GROCO sells.

Specifications for GROCO 1" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut:

Features of GROCO 1" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

• NPSM / NPT combination thread
• #316 Stainless Steel
• Sizes from 1/2" to 3"
• UL Listed 647B
• BSPP and Stainless Steel models available

Package Contents:

• GROCO 1" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

The GROCO 1" NPT Bronze In-Line Ball Valve is full flow and has female NPT threads. The 1-1/4" sizes and larger of this Groco Marine Valve include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. The handle of this Ball Valve from GROCO features a square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult-to-operate valves. For a great way to make sure you are using some of the best equipment that the marine industry has to offer, choose the Greco Bronze In-Line Ball Valve.

Specifications for GROCO 1" NPT Bronze In-Line Ball Valve:

Features of GROCO 1" NPT Bronze In-Line Ball Valve

• Female NPT Threads
• 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining
• Selectable handle rotation
• Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves
• 400 WOG rated
• Full flow
• C83600 bronze construction
• Stainless steel handle and hardware
• Chrome plated solid brass ball (not a hollow ball)
• PTFE seats and seals
• Bonding attachment
• UL listed for fuel or water
• Fits IBVF for Seacock Application

Package Contents:

• GROCO 1" NPT Bronze In-Line Ball Valve

The Groco Thru-Hull Fitting with Nut features an NPSM / NPT combination thread. The Groco Thru-Hull Fitting with Nut has been designed for use with 3/4" NPT Couplings on thru-hull fitting flanges. The stainless steel Thru-Hull Fitting with Nut from GROCO has an NPSM / NPT combination thread and is used for making upline connections to the tank. The Groco Thru-Hull Fitting with Nut allows you to plumb your hoses with both NPT and NPSM threads at the same time. The stainless steel Groco Thru-Hull Fitting with Nut is a great way to plumb your thru-hull fittings with both NPT and NPSM threads on the same nut.

Specifications for GROCO 3/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut:

Features of GROCO 3/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

• NPSM / NPT combination thread
• #316 Stainless Steel
• Sizes from 1/2" to 3"
• UL Listed 647B
• BSPP and Stainless Steel models available

Package Contents:

• GROCO 3/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting w/Nut

1" NPT x 1-1/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

Specifications for GROCO 1" NPT x 1-1/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting:

Features of GROCO 1" NPT x 1-1/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

• 90 degree Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 3"
• Full Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1" NPT x 1-1/4" ID Bronze Full Flow 90 Elbow Pipe to Hose Fitting

3/4" NPT x 3/4" ID Bronze Pipe to Hose Straight Fitting

Specifications for GROCO 3/4" NPT x 3/4" ID Bronze Pipe to Hose Straight Fitting:

Features of GROCO 3/4" NPT x 3/4" ID Bronze Pipe to Hose Straight Fitting

• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 5"
• Standard Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 3/4" NPT x 3/4" ID Bronze Pipe to Hose Straight Fitting

1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting

Specifications for GROCO 1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting:

Features of GROCO 1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting

• Male NPT x Hose connection
• C83600 Bronze
• Sizes from 1/2" to 5"
• Standard Flow
• UL Listed 647B
• Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Package Contents:

• GROCO 1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting

1/2" NPS NPT Combo Bronze Thru-Hull Fitting with Nut

Specifications for GROCO 1/2" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut:

Features of GROCO 1/2" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut

• NPSM / NPT combination thread
• C83600 Bronze
• Sizes from 1/2" to 5"
• UL Listed 647B
• Available with (-W) or without nut (-L)
• BSPP and Stainless Steel models available

Package Contents:

• GROCO 1/2" NPS NPT Combo Bronze Thru-Hull Fitting w/Nut

3/8" NPT Bronze In-Line Ball Valve

Specifications for GROCO 3/8" NPT Bronze In-Line Ball Valve:

Features of GROCO 3/8" NPT Bronze In-Line Ball Valve

• Female NPT Threads
• 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining
• Selectable handle rotation
• Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves
• 400 WOG rated
• Full flow
• C83600 bronze construction
• Stainless steel handle and hardware
• Chrome plated solid brass ball (not a hollow ball)
• PTFE seats and seals
• Bonding attachment
• UL listed for fuel or water
• Fits IBVF for Seacock Application

Package Contents:

• GROCO 3/8" NPT Bronze In-Line Ball Valve

3/4" Stainless Steel Extra Long Thru-Hull Fitting w/Nut

Specifications for GROCO 3/4" Stainless Steel Extra Long Thru-Hull Fitting w/Nut:

Features of GROCO 3/4" Stainless Steel Extra Long Thru-Hull Fitting w/Nut

• Extra long NPSM / NPT combination thread
• #316 Stainless Steel

Package Contents:

• GROCO 3/4" Stainless Steel Extra Long Thru-Hull Fitting w/Nut

Two of each six sizes (Total of 12 round wedges). Sizes: 20mm/0.78; 18mm/0.70; 16mm/0.62; 14mm/0.55; 12mm/0.47; 10mm/0.39. Steel construction.

Specifications for Wisemen Trading Round Steel Axe Handle Wedges:

Package Contents:

• Wisemen Trading Round Steel Axe Handle Wedges

Dimensions: 6.5in x 5.5in. Leather laces. Protects the wood shafts of axes and hatchets in the event of an over strike. Leather construction.

Specifications for Wisemen Trading Large Axe Overstrike Guard:

Package Contents:

• Wisemen Trading Large Axe Overstrike Guard

3/4" Bronze Tri-Flanged Ball Valve/Seacock

Specifications for GROCO 3/4" Bronze Tri-Flanged Ball Valve/Seacock:

Features of GROCO 3/4" Bronze Tri-Flanged Ball Valve/Seacock

• 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position) and one drain plug
• The zerk can also be used for draining
• Field reversible handle allows you to select the closed position orientation (clockwise or counter-clockwise) that best suits the installation
• Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves
• Full Flow
• Triangular base with bolt pattern to match most popular brands makes retrofit easy
• C83600 bronze construction
• Stainless steel handle and hardware
• Chrome plated solid brass ball
• PTFE Seats and Seals
• Bonding attachment on base

Package Contents:

• GROCO 3/4" Bronze Tri-Flanged Ball Valve/Seacock