Knives & Tools

Gunsmithing punches are core tools needed to modify or disassemble firearms. The Accu-Punch 11-Piece Roll Pin Punch Set is designed from the ground up to work better with firearms. The punches are made of hardened steel with a nickel plating to resist corrosion. The hex-shaped handle and rubber O-rings provide precise control during use.

Specifications for Real Avid Accu-Punch 11-Piece Roll Pin Punch Set:

Package Contents:

• Real Avid Accu-Punch 11-Piece Roll Pin Punch Set

Use to effortlessly remove roll pins with diameters that match the punches (1/8in 1/16in 3/32in 5/64in)

- Tap with a hammer to get the roll pin started before using a normal impact punch.

- Helps avoid damage caused by only using an impact punch = more accurate & safer

- Not hollow

Includes common sizes for AR-15s:

1-pc. 1/16in: Bolt Ejector; Charging Handle

1-pc. 5/64in: Gas tube / Gas block

1-pc. 3/32in: Bolt catch; Forward assist retaining pin

1-pc. 1/8in: Trigger Guard

1-pc. 5/32in

1-pc. 3/16in

1-pc. 7/32in

1-pc. 1/4in

1-pc. 5/16in

Specifications for Presma 9 Piece Roll Pin Punch Starter Set:

Package Contents:

• Presma 9 Piece Roll Pin Punch Starter Set

What firearm models does the manufacturer say Presma 9 Piece Roll Pin Punch Starter Set is compatible with? The manufacturer suggests that Presma 9 Piece Roll Pin Punch Starter Set is compatible with Universal

The InfiRay IBP-2 3.1Ah, 3.6V Lithium Ion battery is the replacement rechargeable battery for the InfiRay Cabin series thermal monoculars. 

Specifications for InfiRay Outdoor IBP-2 3.1Ah/3.6V Li-ion Battery Pack:

Package Contents:

• InfiRay Outdoor IBP-2 3.1Ah/3.6V Li-ion Battery Pack

NiB-X Fire Control Group - Mil spec components. NiB-X coated semi auto hammer, trigger and disconnect

Specifications for WMD Guns NiB-X Fire Control Group:

Package Contents:

• WMD Guns NiB-X Fire Control Group

Replacement Battery Charger for LRT and UBF batteries

Specifications for Exothermic Pulsefire LRT Flame Thrower Replacement Battery Charger:

Features of Exothermic Pulsefire LRT Flame Thrower Replacement Battery Charger

• Original battery charger included with any Pulsefire system.
• Compatibility:Pulsefire LRT, Pulsefire UBF

Package Contents:

• Exothermic Pulsefire LRT Flame Thrower Replacement Battery Charger

This 3/16" brass punch with a hi-impact plastic handle is the best size punch for most gunsmithing and gun tinkering operations. It's particularly useful for removing the cross pin that retains the trigger group to the receiver in virtually all pump and semi-auto shotguns and rifles.

Specifications for Forster Universal Drift Punch:

Package Contents:

• Forster Universal Drift Punch

Our Bolt Catch Punch Set includes three of the necessary punches to help install and remove the bolt catch on your AR-15. They are long enough to easily reach the bolt catch roll pin from either side of the receiver and the removal punch has a flat side for removal of the bolt catch roll pin from the front of the receiver. It has been heat treated for hardness so that it will not deform when used. Like our full punch set this also has a life time warranty, if you break it, let us know and we will send you a new one.

Specifications for Obsidian Arms AR-15 Bolt Catch Punch Set:

Features of Obsidian Arms AR-15 Bolt Catch Punch Set

• The BEST tool for removing and installing the bolt catch roll pin
• Can also be used for removing and installing the forward assist roll pin
• 4140 alloy steel is heat treated for the right hardness and durability
• QPQ finished for a rust-preventative coating

Package Contents:

• Obsidian Arms AR-15 Bolt Catch Punch Set
• 3/32in Bolt Catch Removal Punch
• 3/32in Roll Pin Starter Punch
• 3/32in Roll Pin Punch

What firearm models does the manufacturer say Obsidian Arms AR-15 Bolt Catch Punch Set is compatible with? The manufacturer says that Obsidian Arms AR-15 Bolt Catch Punch Set is compatible with AR-15

The Master Set includes both the Smart-Torq and Smart-Drive gunsmithing drivers. With ergonomic comfort grips, both drivers fully integrate with the multi-purpose Force Assist driver. Smart-Torq features easy to see and set in 1-lb increments. For non-torque applications the Smart Drive will be your go to for not only gunsmithing work, but any tasks around the house or shop. Smart-Drive has a free spinning cap for applying additional downward pressure and an LED light for dark spaces. Completing the set are 83 standard and metric black oxide coated gun bits. Gun bits are hollow ground and square cut for precise fitment.

Specifications for Real Avid Smart-Torq & Driver Master Set:

Features of Real Avid Smart-Torq & Driver Master Set

• Complete Bit Set: 83 Professional Gunsmithing, Hollow Ground / Square Cut Bits That Perfectly Match Gun Screw-Slots From Top To Bottom To Reduces Slippage And Risk Of Stripping The Screws
• Accurate Torque Driver: Precise 1 In-Lb Torque Increments For Superior Accuracy And Confidence To Follow Torque Requirements For Tasks Such As Scope Mounting Or Custom Gun Builds
• No Shadow, Led Driver: Illuminated, Long, Bit Driver Extends To Hard-To-Reach And Hard-To-See Areas
• Dual Function Small Driver: Auxiliary Driver For Tight Spaces, Can Also Partner With Both Torque Wrench And Large Screwdriver As Force-Assist Lever That Helps To Loosen Stuck Screws Or Fasten Screws Tighter
• Well-Organized: Easy-Access Case Features Bits Labels And Two Magnetic Compartments To Prevent Losing Small Parts, Screws, Bolts Or Nuts

Package Contents:

• Real Avid Smart-Torq & Driver Master Set
• Case

Steel construction provides the necessary strength to tighten and loosen the flash suppressor nut on an M1A rifle. Rubber handles give a positive gripping surface.

Specifications for Springfield Armory M1A Castle Nut Pliers:

Package Contents:

• Springfield Armory M1A Castle Nut Pliers

Meant to be the ideal addition to the tool box of almost any kind of property manager, the Leatherman Bit Kit Replacement #2 helps to ensure the successful performance of your portable tools. The Leatherman Bit Kit Replacement #2 Tool includes one Hex bit along with two Torx bits along with several other bits that are sure to fit your needs, no matter the circumstance. For a great way to make sure you are using some of the best tools the industry has to offer, choose the Leatherman Bit Kit Replacement #2.

Specifications for Leatherman Bit Kit Replacement #2:

Features of Leatherman Bit Kit Replacement #2

• Included Bits: Torx #6 & #8, Hex 1.5mm & 2mm, Hex 2.5mm & 3mm, Hex 4mm & 5mm, Hex 6mm & 1/4in, Hex 7/32in & 3/16in, Hex 5/32 & 9/64in, Hex 1/8in & 7/64in, Hex 3/32in & 5/64in, Hex 1/16in & .050in

Package Contents:

• Leatherman Bit Kit Replacement #2

Use to effortlessly remove roll pins with diameters that match the punches (1/8in 1/16in 3/32in 5/64in)

- Tap with a hammer to get the roll pin started before using a normal impact punch.

- Helps avoid damage caused by only using an impact punch = more accurate & safer

- Not hollow

Includes common sizes for AR-15s:

1-pc. 1/16in: Bolt Ejector; Charging Handle

1-pc. 5/64in: Gas tube / Gas block

1-pc. 3/32in: Bolt catch; Forward assist retaining pin

1-pc. 1/8in: Trigger Guard

Specifications for Presma 4 Piece Roll Pin Punch Starter Set:

Package Contents:

• Presma 4 Piece Roll Pin Punch Starter Set

What firearm models does the manufacturer say Presma 4 Piece Roll Pin Punch Starter Set is compatible with? The manufacturer says that Presma 4 Piece Roll Pin Punch Starter Set is compatible with Universal

The Mr. Heater 10 ft. Propane Hose Assembly is commonly used to connect units designed for 1 lb. propane cylinders to larger external propane sources. For use with Buddy series models: MH9BX, MH12HB, and MH18B. Fuel filter is not required. Features a swivel 1 - 20" male throwaway cylinder thread and excess flow soft nose P.O.L. Solid brass fittings, stretch tested to 400 psi, and pressure tested to 600 psi.

Specifications for Mr. Heater Mr.heater 10' Buddy Series Hose Assembly:

Features of Mr. Heater Mr.heater 10' Buddy Series Hose Assembly

• Used to connect units designed for 1 lb. propane cylinders to larger external propane sources, For use with Buddy series models: MH9BX, MH12HB, and MH18B, Fuel filter is not required, Features a swivel 1 - 20" male throwaway cylinder thread and excess flow soft nose P.O.L., Solid brass fittings, Stretch tested to 400 psi, Pressure tested to 600 psi.

Package Contents:

• Mr. Heater Mr.heater 10' Buddy Series Hose Assembly

The Mr. Heater Mr.heater 10' Buddy Series Hose Assembly is a quality addition to the Mr. Heater lineup. For more great deals on Camping Gear by Mr. Heater, please browse our Mr. Heater Camping Gear page.

Manufactured to be a very good item for pretty much anybody, we're confident you are going to appreciate the Area 419 Harris Bipod ARCALOCK Clamp Kit.

Established by using some of the most extremely strong and long lasting substances around, these Clamps through Area 419 will provide you with something that will give numerous years of stability.

Area 419 has been developing top quality merchandise for a very long time, and the Area 419 Harris Bipod ARCALOCK Clamp Kit is their particular manner of revealing just how much they care.

Right here at 2AForce, we ensure that it is our obligation to receive the best product for all your needs, and presenting the Area 419 Harris Bipod ARCALOCK Clamp Kit is something that we're delighted to offer.

Specifications for Area 419 Harris Bipod ARCALOCK Clamp Kit:

Features of Area 419 Harris Bipod ARCALOCK Clamp Kit:

• Comes with Harris Adapter and ARCALOCK Clamp Base
• Replaces the swivel stud mounting platform
• Works with the factory tensioning screw or a KMW Pod Loc
• COMPATIBLE ONLY WITH “S” (SWIVEL) TYPE HARRIS BIPODS
• Does not work in conjunction with Barricade Stop
• NOTE: Bipod not included

Package Contents:

• Area 419 Harris Bipod ARCALOCK Clamp Kit

Kak Multi Position Dimple Drill Jig

4140 Thru Hardened Steel

Mag Phosphate Finish

For Use With .750 Diameter Barrels

Dimples Barrels For Gas Block Set Screw Spacing Of

.500

.470

.450

.425

.400

Includes

Drill Jig

Keo Brand Spot Drill

Pointed Set Screw For Alignment

Allen Wrench

Specifications for KAK .750 Multi Position Dimple Drill Jig:

Package Contents:

• KAK .750 Multi Position Dimple Drill Jig

Our Pivot Pin Detent Tool is designed to help install the pivot pin detent in an AR-15 lower. Installing AR-15 detents can be a challenge and is often times the most frustrating part of building an AR-15. However, with the Pivot Pin Detent Tool it makes the installation process much easier and less likely that the detent will slip out and get lost in your work area.

Specifications for Obsidian Arms AR-15 Pivot Pin Detent Tool:

Features of Obsidian Arms AR-15 Armorer's Pivot Pin Detent Tool

• 4140 alloy steel is heat treated for the right hardness and durability
• QPQ finished for a rust-preventative coating

Package Contents:

• Obsidian Arms AR-15 Armorer's Pivot Pin Detent Tool

What firearm models does the manufacturer say Obsidian Arms AR-15 Pivot Pin Detent Tool is compatible with? The manufacturer says that Obsidian Arms AR-15 Pivot Pin Detent Tool is compatible with AR-15

At Spike's Tactical, we believe our customers should be able to own the same tools we made for ourselves to use in the armory. All of our tools are high grade and professional quality.

Specifications for Spikes Tactical 3 Pin AR10 Wrench:

Features of Spikes Tactical 3 Pin AR10 Wrench:

• Material: 4140 Chromoly Steel
• Heat Treated
• Finish: Black Nitrite

Package Contents:

• Spikes Tactical 3 Pin AR10 Wrench

Radiant heater with swivel regulator control for high and low heat settings. Indoor safe with automatic low oxygen and tip over shutoffs. Heats up to 200 sq. ft. using one 1 lb. disposable propane cylinder or 20 lb. cylinder.

Specifications for Mr. Heater Portable Buddy Heater - Standard:

Features

• 4,000 - 9,000 BTU per hour, For use with propane gas, Heats up to 225 sq.ft., Single control start knob, Piezo igniter, Hi-Low heat settings, Swivel regulator, Automatic low oxygen shut-off system (ODS), Accidental tip-over safety shut-off, Connects to one 1 lb. cylinder, May also be connected to 20 lb. tank with optional hose

Package Contents:

• Mr. Heater Portable Buddy Heater - Standard

The Mr. Heater MH9BX Buddy Portable Buddy Heater Black/Red is a quality addition to the Mr. Heater lineup. For more great deals on Camping Gear by Mr. Heater, please browse our Mr. Heater Camping Gear page.

These medium coarse handles allow you to remove the deeper scratches left from coarser stones with the 400 grit and finish with a great, toothy working edge on the 600 grit. These Diamond Stones have a break-in period of about 20 sharpening sessions and an average lifespan of 700 sharpenings.

Specifications for Wicked Edge Premium 400/600 Grit Diamond Stones Pack:

Features of Wicked Edge Premium 400/600 Grit Diamond Stones Pack:

• Grit Range: 400 (medium-coarse) and 600 (coarse).
• Use Case: Scratch refinement and creating a dependable working edge.
• Break-In Period: Approx. 20 sharpening sessions.
• Lifespan: Up to 700 sharpenings per stone.

Package Contents:

• Premium Monocrystalline 400 Grit and 600 Grit Diamond Stones

The M41 Spanner Wrench is designed to provide quick and easy installation and removal of theM41 Severe-Duty Muzzle Brake. Close fitting design provides the best method of installation to avoid damage or marring. Square 3/8 drive socket allows attachment of a torque wrench for precise tightening.

Specifications for Precision Armament M41 Spanner Wrench:

Features of Precision Armament M41 Spanner Wrench:

• Material: Stainless Steel
• Finish: Natural
• Weight: 4.5 oz.
• Length: 8.38
• Drive Socket: 3/8
• Max Torque: 60 ft-lbs

Package Contents:

• Precision Armament M41 Spanner Wrench

The Blast and Crunch Leatherman Sheath 934835 is the classic standard leather sheath comes witha snap closure and bears the Leatherman name and logo. Fits all Leatherman Blast and Crunch style Multi Tools

Features of Leather man Knife Accessories 934835 Leather Sheath for the Blast And Crunch Multi Tools:

• Standard high quality leather construction
• Bears Leatherman Logo and Name
• Snap Closure

Package Contents:

• Leatherman Blast and Crunch Multitool Sheath

FROGLUBE is a cutting edge biodegradable lubricant made from ?USDA Certified Food-Grade?. All ingredients are produced in the USA using a proprietary formula. It is a non-toxic substance that dissolves carbon on contact. It has a heavy specific gravity which enables it to ?season? the metal by absorption deep into the pores. Using FROGLUBE results in a durable dry slick wax-like surface that reduces friction eliminates fouling and destroys rust. FROGLUBE is safe for plastic urethane nylon and wood. FROGLUBEwill give your weapon many extended years of service.FROGLUBE will not harm the environment. It can be disposed of without the need for prohibitive HAZMAT controls. Employees will be protected from the affects of working in and around toxic chemicals.FROGLUBE IS A BIODEGRADABLE LUBRICANT CLEANER AND PROTECTANT.CONTAINS NO PETROLEUM OR WATER.NON-HAZARDOUS IN EVERY WAY.PLEASANT MINT SMELL.

Specifications for FrogLube Paste:

Features of FrogLube Paste

• 1 gal, tub Froglube bio based, lubricant, preservative pastewater displacement type preservative paste
• Use for external applications
• Bonds to metal surface
• Eliminate burnt residues
• Dissolves carbon fouling
• Functions from -40F to +700F.
• Reduces operating temperatures
• Non hazmat; all food grade ingredients
• USDA certified bio-based content 99% designated for federal purchase
• Ca prop 65 exempt

Package Contents:

• FrogLube Paste

This set includes our Bolt Catch Removal Punch that is long enough to reach the bolt catch pin from either side of the receiver and still have clearance so you do not have to swing past the receiver to hit it. It has also been heat treated for hardness so that it will not deform when used. A Delrin Punch for starting trigger and hammer pins as well as pushing out take down and hinge pins. Also includes a Small Drift Pin for positioning the trigger and hammer in a lower for easy installation. The newest addition to the set is our Pivot Pin Detent Tool that makes installing the pivot pin detent an easy process. Like our full punch set this also has a life time warranty, if you break it, we replace it.

Specifications for Obsidian Arms AR-15 Specialty Tool Set:

Features of Obsidian Arms AR-15 Armorer's Specialty 4-Piece Tool Set

• Professional set of four punches and tools
• 4140 alloy steel is heat treated for the right hardness and durability
• QPQ finished for a rust-preventative coating
• Includes:
• 3/32in Bolt Catch Removal Punch for removing the bolt catch roll pin from the front of the receiver
• Delrin Punch for starting trigger and hammer pins as well as pushing out take down and hinge pins.
• Small Drift Pin for positioning the trigger and hammer in a lower for easy installation.
• Pivot Pin Detent Tool to keep control of the Pivot Pin detent during installation

Package Contents:

• Obsidian Arms AR-15 Armorer's Specialty 4-Piece Tool Set
• 3/32in Bolt Catch Removal Punch
• Delrin Punch
• Small Drift Pin
• Pivot Pin Detent Tool

What firearm models does the manufacturer say Obsidian Arms AR-15 Specialty Tool Set is compatible with? The manufacturer suggests that Obsidian Arms AR-15 Specialty Tool Set is compatible with AR-15

The XTS AR-15 Bolt Catch Roll Pin Starter/Finish Punch Tool Kit has been designed to be the perfect set of tools for anyone in need of high quality steel punches and tools. Made using incredibly durable materials and construction, the XTS Bolt Catch Roll Pin Starter/Finish Tool Kit will provide you with years of reliable and efficient service. For a great way to make sure you have the means to properly install your bolt catch roll pin, choose the XTS AR-15 Bolt Catch Roll Pin Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Tool Kit.

Specifications for XTS AR-15 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set:

Features of XTS AR-15 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set

• Made in specialized factories
• Steel
• Parkerized Finish

Package Contents:

• XTS AR-15 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set

What firearm models does the manufacturer say XTS AR-15 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set is compatible with? The manufacturer suggests that XTS AR-15 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set is compatible with AR-15

The Grace USA Original Gun Care Screwdriver Set is a true classic. This gun tool kit consists of 8 custom hollow-ground screwdrivers, made to fit all the small and irregular shaped screws that one encounters during gun maintenance, from scope screws to plug screws, guard screws, floor plate screws, sight screws and more. Still hand-assembled as it has been for decades, each screwdriver in the Grace Original Gun Care Screwdriver Kit has a turned Maine hardwood handle with a protective finish. The screwdriver blades are square-shanked and hardened and tempered to RC 52-56 standards, so they will not twist or chip. The Grace USA Original Gun Care Set is still an essential component of firearms maintenence!

Specifications for Grace USA Original Gun Care Screwdriver Set:

Features of GRACE HG8 Original Gun Care Screwdriver Set:

• 8 screwdriver set
• Turned Maine wood handles
• Bits and heads are metal heat treated to Rockwell RC 52-56 levels
• Deals with most standardized gun screws

Package Contents:

• Grace Original Gun Care Tool Set
• • 8 Screwdrivers
  • Case

Your AR 15 build will have many small parts and pins, this 4pc hollow end starter punch set will make the install a breeze. With these four tools you can properly install parts such as trigger guards, gas blocks, and forward assist without the worry of causing damage trying to get the roll pin started. Dont forget to check out the RPF-PS roll pin finish set to finish up the job.

Specifications for XTS AR-15 Roll Pin Punch Starter Set:

Features of XTS AR-15 Roll Pin Punch Starter Set

• Material: Hardened 1018 Steel, Parkerized Finish

Package Contents:

• XTS AR-15 Roll Pin Punch Starter Set

What firearm models does the manufacturer say XTS AR-15 Roll Pin Punch Starter Set is compatible with? The manufacturer says that XTS AR-15 Roll Pin Punch Starter Set is compatible with AR-15

Having the right tool is half the battle, and this Spikes Tactical Heavy Duty M4 Stock Wrench is just the tool for the job. A must-have for completing your weapon build, these Specialty Wrenches developed by Spikes Tactical simplify the gunsmithing process by holding your weapon stock open with an over-sized, easy to wield tool. With a phosphate finish and 4140 chromoly steel construction, every detail of the Spikes Tactical Heavy Duty M4 Stock Wrench is optimized to the task at hand. Completely adjustable, the Spikes Tactical Heavy Duty M4 Stock Wrench Kit gives you every edge you need to complete your build with the best equipment.

Specifications for Spikes Tactical Heavy Duty M4 Stock Wrench:

Features of Spikes Tactical Heavy Duty M4 Stock Wrench:

• Material: 4140 Chromoly Steel
• Heat Treated
• Finish: Phosphate Finish
• Includes: Hand Wrapped in 550 Paracord

Package Contents:

• Spikes Tactical Heavy Duty M4 Stock Wrench

40" (101cm) USB Cord A to Micro

Specifications for Streamlight USB Custom Flashlight Charging Cord A to Micro:

Package Contents:

• Streamlight USB Custom Flashlight Charging Cord A to Micro

The Wicked Edge Scissor Attachment mounts in the vise of a Wicked Edge sharpener and clamps the scissors so they lean out over the side of the sharpener, allowing the sharpening stones to reach the extremely wide angle on the scissor's bevel.This attachment is compatible with all Wicked Edge models.We highly recommend sharpening scissors with stones of 1000 grit orfiner.

Specifications for Wicked Edge Scissor Attchment:

Package Contents:

• Wicked Edge Scissor Attchment

The Laser Ammo Battery Pack is composed of 3 cells that are shrink-wrapped for ease of use. These Laser Trainers contain no mercury and are environmental friendly. Suitable for use with all of SureStrike cartridges. The Laser Ammo Battery Pack includes 3 packs of 3 batteries. The silver oxide dry cell batteries shrink wrapped for ease of use.

Important: do not remove the shrink wrap from the batteries.

Specifications for Laser Ammo Battery Pack:

Features of Laser Ammo Battery Pack:

• 3 packs of 3 butten cell elkaline batteries with blue shrink wrap
• with a total of 4.7V

Package Contents:

• Laser Ammo Battery Pack (3 pcs)

NcSTAR Gun Accessory - CR2032 Battery For All Red Dots & Ill. Scopes AB2032 on sale and available from our online store.

Specifications for NcSTAR Gun Accessory - CR2032 Battery For All Red Dots & Ill. Scopes AB2032:

Features of NcSTAR Gun Accessory - CR2032 Battery For All Red Dots & Ill. Scopes AB2032:

• 3-Volt CR2032 Lithium Type Battery

Package Content:

• Gun Accessory - CR2032 Battery For All Red Dots & Ill. Scopes - Quantity = 1