Fishing Tools & Accessories

This Flush Mount Rod Holder with Cap is uniquely designed to incorporate a gasket, reducing leakage common on other cast rod holders. Accommodates rods up to 1-1/2' in diameter. Features a 30 degree angle. Constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Installs with three 1/4" FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel Rod Holder.

Specifications for Sea-Dog Cast Stainless Steel Flush Mount Rod Holder w/Cap:

Package Contents:

• Sea-Dog Cast Stainless Steel Flush Mount Rod Holder w/Cap

These Track Rod Holders are designed to hold fishing rods in the toughest conditions. Can be mounted vertically or horizontally in boats and homes. Includes two 7' pre-drilled aluminum tracks and four PVC clips. Installs with four fasteners (included).

Specifications for Sea-Dog Track Rod Holder:

Package Contents:

• Sea-Dog Track Rod Holder

The Vexilar Ultra Pack and Pro Pack II Rod Holder was developed to be the ideally suited product for anybody in need of an outstanding selection..

These Fishing Gear through the skilled product specialists at Vexilar are made using dependable and reliable materials, as a way to provide you with a product which is going to be beneficial for many years. Manufactured using some of the best accessible components and engineering, these Fishing Gear through the product professionals at Vexilar can last you an incredibly lengthy time.

Vexilar has been developing high-quality merchandise for a very long time, and the Vexilar Ultra Pack and Pro Pack II Rod Holder is their manner of revealing exactly how much they care.

Right here at 2AForce, we make it our responsibility to receive the perfect product for your requirements, and showcasing the Vexilar Ultra Pack and Pro Pack II Rod Holder is one thing that we are happy to offer.

Specifications for Vexilar Ultra Pack and Pro Pack II Rod Holder:

Features of Vexilar Ultra Pack and Pro Pack II Rod Holder

• Rod Holder Fits Ultra and Pro Pack II cases only

Package Contents:

• Vexilar Ultra Pack and Pro Pack II Rod Holder

Gimbaled Rod Holder Mounting Accessory works on all of their fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with all hardware necessary to attach the mount to the table. Great for mounting a variety of accessories. Constructed of injection molded polypropylene and stainless steel.

Specifications for Sea-Dog Fillet Table Rod Holder Gimbal Mount:

Package Contents:

• Sea-Dog Fillet Table Rod Holder Gimbal Mount

These Rod Storage Racks feature soft foam inserts for securing rods and reducing potential damage from rough seas. Constructed of UV resistant injection molded polypropylene. Installs with #8 FH fasteners (included). 325613 holds 3 rods. 325615 holds 5 rods.

Specifications for Sea-Dog Storage Rack:

Features of Sea-Dog Storage Rack

• Black injection molded of durable ABS, Dimensions: A: 7-13/16" B: n/a C: 4-3/16" D: 1-15/16" E: 2-7/8", Soft foam inserts hold 5 rods securely, Installs with four #8 FH fasteners (not included)

Package Contents:

• Sea-Dog Storage Rack

The Scotty 426 Side Slide Track Adapter is a quick, effective means of firmly locking down your post mounted Scotty rod holders and accessories when track is mounted on its side as opposed to being top mounted. The adaptor easily slides into place and utilizes the revolutionary Scotty 428 Gear-Head technology, allowing you to quickly change rod holder positions with a simple "twist". You can use your favorite, fully adjustable Scotty rod holder or accessory and adjust it to any vertical or horizontal position without having to drill permanent mounting holes. Designed to fit Scotty Track and most other small track systems, this product is a must for serious anglers.

Specifications for Scotty 426 Side Slide Track Adapter:

Features of Scotty 426 Side Slide Track Adapter

• The Scotty 426 Side Slide Track Adapter is a quick, effective means of firmly locking down your post mounted Scotty Rod Holders and Accessories when track is mounted on its side as opposed to being top mounted
• The 426 easily slides into place and utilizes the revolutionary Scotty 428 Gear Head technology, allowing you to quickly change rod holder positions with a simple twist
• You can use your favorite, fully adjustable Scotty Rod Holder or accessory and adjust it to any vertical or horizontal position without having to drill permanent mounting holes
• Designed to fit Scotty Track and most other small track systems, this product is a must for serious anglers

Package Contents:

• Scotty 426 Side Slide Track Adapter

The Scotty Side Slide Track Adapter is a quality addition to the Scotty lineup.

Easily clamps on boats or piers with adjustable rod rest position. Fits most rod styles. Mounting hardware included.

Package Contents:

• South Bend Clamp On Rod Holder

The South Bend Clamp On Rod Holder is a quality addition to the South Bend lineup.

The Original Rod Saver 10 Inch strap is still hard to beat when it comes to keeping fishing rods in the boat and out of the water. This single strap model includes stainless steel mounting hardware

Specifications for Rod Saver Original Rod Holder 10in Single Strap:

Package Contents:

• Rod Saver Original Rod Holder 10in Single Strap

The Original Rod Saver 10 Inch & 6 Inch Strap is the most popular model. 10" strap for the handle end of the rod and 6" strap for the tips. Holds up to 6 rods. Includes stainless steel mounting hardware.

Specifications for Rod Saver Original 10in & 6in Set:

Features of Rod Saver Original 10" & 6" Set

• 10" strap for the handle end of the rod, 6" strap for the tips, Holds up to 6 rods, Includes stainless steel mounting hardware

Package Contents:

• Rod Saver Original 10in & 6in Set

The Original 8 Inch and 6 Inch strap is their smallest set of 2 straps. 8 Inch strap for the handle end of the rod and the 6 inch strap for the tips. Holds up to 4 Rods. includes stainless steel mounting hardware.

Specifications for Rod Saver Original Rod Holder 8in & 6in Set:

Features of Rod Saver Original Rod Holder 8" & 6" Set

• Includes stainless steel mounting hardware, Holds up to 4 Rods, Original 8 Inch and 6 Inch strap is our smallest set of 2 straps, 8 Inch strap for the handle end of the rod and the 6 inch strap for the tips

Package Contents:

• Rod Saver Original Rod Holder 8in & 6in Set

The Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most chemicals. 14" long with non-corrosive molded hook.

Specifications for Rod Saver Poly Rod Strap:

Features of Rod Saver Poly Rod Strap

• Molded of black polyurethane material
• Will retain its stretch and remain unaffected by sunlight and most chemicals
• Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market
• Easy to use and install
• Refer to manufacturer recommendations and guidelines to ensure a proper fit

Package Contents:

• Rod Saver Poly Rod Strap

A wraparound that is a fast, easy protective cover for your reels. Designed for all fresh-water bait-casting reels. Protects from dust, moisture and sun.

Specifications for Rod Saver Bait & Casting Reel Wrap:

Package Contents:

• Rod Saver Bait & Casting Reel Wrap

Includes soft black flange gasket with integral flip-up cap. Soft black lip. Replacement or upgrade for older rod holders. Fits Perko 0452DP0STS. Check manufacturer part and model numbers to ensure proper fit. Built from quality materials.

Specifications for Perko Rod Holder Cap & Gasket Kit:

Features of Perko Rod Holder Cap & Gasket Kit

• Soft Black Flange Gasket with Integral Flip-Up Cap
• Soft Black Lip Liner
• Replacement or Upgrade for Older Holders

Package Contents:

• Perko Rod Holder Cap & Gasket Kit

A simple way to enhance your fishing adventure, the Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575 was made to be the most suitable supplement to your tackle box. Built utilizing the trustworthy resources you expect to see from this excellent manufacturer, the Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575 is loaded with features to assist you to catch more fish. For an awesome way to be certain that you're angling with some of the most effective gear the angling field is offering, pick the Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575.

Specifications for Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575:

Features of Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575

• Construction: Vinyl Rubber

Package Contents:

• Lee's Tackle Vinyl Rubber Insert for RH530, RH530SS, & RH575

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

The AL7211CR (1 3/8" - ID ) and the MX7211CR (1 1/2" - ID) Perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it their most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges).

Specifications for Lee's Tackle 45 Degree Center Rigger Holder:

Features of Lee's Tackle 45 Degree Center Rigger Holder

• Finish: Silver

Package Contents:

• Lee's Tackle 45 Degree Center Rigger Holder

For use with all Mate Series Rod & Cup Holders.

Specifications for Mate Series Stainless Steel Backing Plate:

Package Contents:

• Mate Series Stainless Steel Backing Plate

Flush Mount Rod Holder

Heavy Duty Bar Pin

All Stainless Steel

RH-525SS/XS Medium 30

The choice of boat manufacturers and consumers alike Lee's has been the Rod Holder Specialist for over 50 years.

Specifications for Lee's Tackle 30 Stainless Steel Bar Pin Rod Holder:

Features of Lee's Tackle 30 Stainless Steel Bar Pin Rod Holder

• Angle: 30 Degrees
• Construction: Stainless Steel
• Diameter (Inches): 2.0"
• Finish: Polished
• Length (Inches): 8.0"
• Mounting Style: Flush

Package Contents:

• Lee's Tackle 30 Stainless Steel Bar Pin Rod Holder
• Flush Mount Rod HolderBar PinAll Stainless SteelRH-525SS/XS Medium 30The choice of boat manufacturers and consumers alike Lee's has been the Rod Holder Specialist for over 50 years.

Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. Available with Quick Laydown with five positions 0,15,30,45,60 degree degrees. No ball bearings to rust. Internal Delrin and nylon bearing surfaces provide smooth operation and prevent metal to metal contact. Accepts their 16Ft Extra Strong (AP3916XS) or 18Ft (AP3918) Outrigger Pole. Has 4"x6" Mounting plate. Extends 14" above and 8-1/2" below mounting plate. Fits all outrigger ready boats.

Specifications for Lee's Tackle Sidewinder Bolt-In Outrigger Mounts, Lay-Down Version:

Package Contents:

• Lee's Tackle Sidewinder Bolt-In Outrigger Mounts, Lay-Down Version

Stainless Steel Cap for Round Plastic Rod Holders

Specifications for Mate Series Stainless Steel Cap f/Round Plastic Rod Holders:

Package Contents:

• Mate Series Stainless Steel Cap f/Round Plastic Rod Holders

Rod Holder - Medium - 0 - Stainless SteelThe choice of boat manufacturers and consumers alike Lees has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0 15 & 30 degree) in Stainless Steel. All of our Rod Holders are polished by hand then electropolished Lees has the rod holder to suit any task.

Specifications for Lee's Tackle Rod Holder Medium:

Package Contents:

• Lee's Tackle Rod Holder Medium

RH52815 Degree Medium Vinyl Rubber Insert for RH529H RH529HS RH5329H RH529XS

Specifications for Lee's Tackle Vinyl Rubber Insert for RH529H & RH529HS:

Features of Lee's Tackle Vinyl Rubber Insert for RH529H & RH529HS

• Construction: Vinyl Rubber

Package Contents:

• Lee's Tackle Vinyl Rubber Insert for RH529H & RH529HS

RH5930

Stainless Steel Backing Plate for 0 15 & 30 Heavy Rod Holders.

Specifications for Lee's Tackle Stainless Steel Backing Plate f/Heavy Rod Holders:

Features of Lee's Tackle Stainless Steel Backing Plate f/Heavy Rod Holders

• Construction: Stainless Steel

Package Contents:

• Lee's Tackle Stainless Steel Backing Plate f/Heavy Rod Holders

PVC Drain Cap f/Heavy Rod Holders 1/4" NPT

PVC Drain Cap for Heavy Rod Holders - 1/4" NPT for hose barb

Specifications for Lee's Tackle PVC Drain Cap f/Heavy Rod Holders 1/4in NPT:

Package Contents:

• Lee's Tackle PVC Drain Cap f/Heavy Rod Holders 1/4in NPT

Flush Mount Rod Holder

Heavy Duty Bar Pin

All Stainless Steel

RH-530SS/XS Large 30

The choice of boat manufacturers and consumers alike Lee's has been the Rod Holder Specialist for over 50 years.

Specifications for Lee's Tackle 30 Stainless Steel Heavy Duty Bar Pin Rod Holder:

Features of Lee's Tackle 30 Stainless Steel Heavy Duty Bar Pin Rod Holder

• Angle: 30 Degrees
• Construction: Stainless Steel
• Diameter (Inches): 2.25"
• Finish: Polished
• Length (Inches): 10.0"
• Mounting Style: Flush

Package Contents:

• Lee's Tackle 30 Stainless Steel Heavy Duty Bar Pin Rod Holder
• Flush Mount Rod HolderBar PinAll Stainless SteelRH-530SS/XS Large 30The choice of boat manufacturers and consumers alike Lee's has been the Rod Holder Specialist for over 50 years.

RH5160 Dedree Heavy Duty Vinyl Rubber Insert for RH515 RH532 CH110 RH532V RH532VS/XS

Specifications for Lee's Tackle Vinyl Rubber Insert for RH5115, RH532V, RH532VS, RH577VS & CH110:

Features of Lee's Tackle Vinyl Rubber Insert for RH5115, RH532V, RH532VS, RH577VS & CH110

• Construction: Vinyl Rubber

Package Contents:

• Lee's Tackle Vinyl Rubber Insert for RH5115, RH532V, RH532VS, RH577VS & CH110

RH5931

Stainless Steel Backing Plate for 0 15 & 30 Medium Rod Holders.

Specifications for Lee's Tackle Stainless Steel Backing Plate f/Medium Rod Holders:

Features of Lee's Tackle Stainless Steel Backing Plate f/Medium Rod Holders

• Construction: Stainless Steel

Package Contents:

• Lee's Tackle Stainless Steel Backing Plate f/Medium Rod Holders

Super strong and very easy to assemble, their poles will always perform. These poles will fit Lees Sidewinder and other pole holders. You can count on these poles to give you years of high performance and enjoyment.

Specifications for Lee's Tackle 18.5ft Bright Silver Pole w/Black Spike Step Tube 1.5in:

Features of Lee's Tackle 18.5' Bright Silver Pole w/Black Spike Step Tube 1.5"

• Length (Feet): 18.5'

Package Contents:

• Lee's Tackle 18.5ft Bright Silver Pole w/Black Spike Step Tube 1.5in
• 18.5' Bright Silver Standard Poles f/ SidewinderThese 18.5' standard poles are extra strong with a bright silver finish with black spikes.

Without a doubt, their swivel base rod holder is the 'Ultimate Rod Holder' for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ? inch lock nut at the bottom of the rod holder.

For the 'Ultimate Installation' use their stainless steel backing plates. Designed for Lee swivel base and heavy flush rod holders, theyre constructed from heavy gauge type 316 stainless plate and have built in safety eyes on both sides. Available in two models, the RH5900 accommodates 0 & 15 degree rod holders in gunnels up to 1-3/4' thick. The RH5930 accommodates 30 degree rod holders in gunnels up to 1-1/2' thick. Both come complete with stainless bolts, locknuts and washers for a maximum strength installation.

Specifications for Lee's Tackle Stainless Steel Heavy Duty Bulkhead Mount w/Swivel Base 2.25in OD X 10.5in Tube:

Features of Lee's Tackle Stainless Steel Heavy Duty Bulkhead Mount w/Swivel Base 2.25" OD X 10.5" Tube

• Construction: Stainless Steel
• Diameter (Inches): 2.25" O.D.
• Finish: Polished
• Mounting Style: Bulkhead

Package Contents:

• Lee's Tackle Stainless Steel Heavy Duty Bulkhead Mount w/Swivel Base 2.25in OD X 10.5in Tube

RH52630 degree Medium Vinyl Rubber Insert for RH525 RH525SS RH5325RH52XS

Specifications for Lee's Tackle Vinyl Rubber Insert for RH525 & RH525SS:

Features of Lee's Tackle Vinyl Rubber Insert for RH525 & RH525SS

• Construction: Vinyl Rubber

Package Contents:

• Lee's Tackle Vinyl Rubber Insert for RH525 & RH525SS

RH53515 Degree Heavy Duty Vinyl Rubber Insert for RH534H RH534HS RH5334H RH579H

Specifications for Lee's Tackle Vinyl Rubber Insert for RH534H, RH534HS & RH579H:

Features of Lee's Tackle Vinyl Rubber Insert for RH534H, RH534HS & RH579H

• Construction: Vinyl Rubber

Package Contents:

• Lee's Tackle Vinyl Rubber Insert for RH534H, RH534HS & RH579H