Electronics

Replacement Band for Forerunner 910XT - Black

This band for the Forerunner 910XT is adjustable and comfortable. Instructions spare pins and 2 screwdrivers for pin removal are included.

Compatible Devices:

Forerunner 910XT

Specifications for Garmin Replacement Band f/Forerunner 910XT:

Package Contents:

• Garmin Replacement Band f/Forerunner 910XT

The Code Red 21-K Microphone is a compact and lightweight handheld microphone with a boom arm that pivots to allow you to position the mike in the most convenient spot in your hand. This hands-free Code Red Microphone meets water, wind, dust and impact resistance standards, so you can trust it in the worst conditions. The compact and lightweight Code Red 21 Microphone w/ Boom Arm Rotating Clothing Clip is extremely versatile for use with Motorola and Kenwood radios, and the boom arm pivots to fit the mike close to your mouth to minimize wind noise. Be sure to check out our collection of other Communication Devices from Code Red in the Code Red Communication Devices section of our store.

Package Contents:

• Code Red Signal 21-k Microphone

The Code Red Signal 21-k Microphone is a quality addition to the Code Red lineup.

The Humminbird Plastic Thru-Hull XTH9DB74P includes a dual 20-degree beam, transmit only, plastic hull, and 30 feet of cable. Whether you choose a single beam for a certain area of the river or you go with a dual beam for general observation, you're ensuring a quality experience that will translate to landing more fish. This Thru-Hull Fishfinder from Humminbird allows for below-the-hull scanning in most situations, providing great scanning angles and detail below the hull. With the Humminbird XTH 9 DB 74P Thru-Hull Fishfinder, you can know exactly which way the crank is when you're within striking distance. The best fishing is often right in your face, and when you're not, you're losing fish. That's why the Humminbird Dual Beam XTH9 Thru-Hull Fishfinder is so handy. Setup is fast and easy, and you get a crystal-clear picture, day or night.

Specifications for Humminbird XTH 9 DB 74 P Dual Beam Plastic Thru-Hull:

Features of Humminbird XTH 9 DB 74 P Dual Beam Plastic Thru-Hull

• Dual Beam 20/74 degrees
• 200/50kHz temp included
• 6.7"L x 3"W x 1.4"D (below boat hull)
• Shaft: 1" diameter
• Cable Length: 30'

Package Contents:

• Humminbird XTH 9 DB 74 P Dual Beam Plastic Thru-Hull

PTC UNB 2 Portable Soft Sided Carry Case - No Battery or Charger

Portable Conversion Kit

Soft-sided portable bag with carry handle

Transducer Battery & Charger storage compartments

Hardware and HELIX 5 & HELIX 7 Gimbal mounts included to convert your existing transducer and control head to portable use

BATTERY & CHARGER NOT INCLUDED

Specifications for Humminbird PTC UNB 2 Portable Soft Sided Carry Case:

Package Contents:

• Humminbird PTC UNB 2 Portable Soft Sided Carry Case

Powered Suction Cup Mount with Speaker

Garmin's premium suction cup mount provides easy viewing of your 5" device. It includes a speaker with the highest sound quality in the nvi lineup so voice prompts come through clearer. Mount can be attached to your windshield or any smooth flat surface.

Mount and power your nvi device with this powered suction cup mount. Included speaker provides clear voice prompts.

Compatible Devices:

nvi 3550LM

nvi 3590LMT

Specifications for Garmin Powered Suction Cup Mount w/Speaker f/nuvi 3550LM & 3590LMT:

Package Contents:

• Garmin Powered Suction Cup Mount w/Speaker f/nuvi 3550LM & 3590LMT

5" Weatherproof PA Speaker w/Plastic Base

(SPC5P)

Our 5 inch PA speaker is weatherproof and has a white ABS plastic base that pivots 90 degrees. It offers a frequency response of 300 to 15 kHz and a 15 watt maximum power rating. It

Specifications for Speco Tech SPC-5P 5" Weatherproof PA Speaker w/Plastic Base:

Features of Speco Tech SPC-5P 5" Weatherproof PA Speaker w/Plastic Base

• Power - Output (Watts): 15w
• Shape: Round

Package Contents:

• Speco Tech SPC-5P 5" Weatherproof PA Speaker w/Plastic Base

Part #: TPK300

NavPod Protects Your Electronics In Harsh

Conditions

Tamper-Proof Wrench Set

Available in 2.5" 6" and 6" T Handle.

Specifications for NavPod TPK300 Tamperproof Wrench Set:

Package Contents:

• NavPod TPK300 Tamperproof Wrench Set

The Garmin GRF 10 Rudder Feedback Sensor is designed to work with the Garmin GHP 12 navigation system, to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The Garmin GRF10 Rudder Sensor uses a magnetic sensor to relay position information for your sailboat rudder, eliminating friction that causes other types of sensors to wear out. The arm of the Garmin GRF 10 Sailboat Sensor is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is - giving sailors an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds.

Features of Garmin Rudder Feedback Sensor for Sailboats:

• Know where the rudder is positioned without having to look back
• Make smoother maneuvers and avoid over-compensating
• Save undue wear and stress on their autopilot system by eliminating force on the rudder when it's already stopped left or right.

Package Contents:

• Garmin GR 10 Boat Rudder Feedback Sensr

The Garmin Vehicle Power Cable lets you power up your GPS navigator while you're on the go. Compatible with numerous Garmin GPS devices, this 12 V adapter is your in-vehicle charger when you're out on the open road. The Garmin Vehicle Charger Cable includes a USB jack that lets you plug in and power up any USB-equipped compatible device, including many devices from the Garmin Nuvi series and the Garmin Zumo line.

Specifications for Garmin Nuvi Vehicle Power Cable:

Features of Garmin Nuvi / Zumo Car Charger Cable:

• USB outlet
• Fits into most car cigarette lighters
• Compatible with Garmin Zumo and Garmin Nuvi GPS navigators

Package Contents:

• Garmin Vehicle Charging Cable for Nuvi and Zumo

Pumpset

Specifications for Si-Tex 18CI Pumpset 12V:

Features of Si-Tex 18CI Pumpset 12V

• 18CU
• 12V

Package Contents:

• Si-Tex 18CI Pumpset 12V

Ambient Air Temperature Probe (-20C to 80C or -4F to 176F)

Specifications for Maretron Ambient Air Temp Probe:

Package Contents:

• Maretron Ambient Air Temp Probe

Mechanical

Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray

Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray

Contact Mat/Plating: Brass/Gold

Coupling Nut Mat/Plating: Brass/Nickel

Connector Outside Diameter: 0.59?Electrical

Current Rating: 4.0 Amps

Voltage Rating: 250 V

Cable

Outer Jacket Mat/Color: PVC/Gray

Conductor Insulation Material: HDPE (data pair) SRPVC (power pair)

Number of Conductors: 4X22 AWG 22 AWG Drain Wire

Shielding (3-Levels): FOIL (Overall) FOIL (Power Pair) FOIL (Data Pair)

Environmental

Protection Class: IEC IP68 NEMA 1346P

Temperature Rating: -40 deg C to 80 deg C to (-40 deg F to 176 deg F)

Approvals

(Cable) UL: PLTC 75 deg C Sunlight Resistant E90625 AWM 80 deg C 300V

(Cable) CSA: CMX-OUTDOOR-CMG LL54185 75 deg C AWM I/II A/B 80C 300V FT4

NMEA: NMEA 2000 Approved

Specifications for Maretron Micro Double-Ended Cordset:

Package Contents:

• Maretron Micro Double-Ended Cordset

ACM100 Alternating Current Monitor

Maretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000 marine data network. The ACM100 can monitor power busses generators or utility power. ACM100 output information is then displayed with networked NMEA 2000 equipment such as the Maretron DSM250 dedicated display or with NMEA 2000 compatible software such as Maretron N2KView.

Best of all the ACM100 is NMEA 2000 certified so you can view any and all AC information anywhere on the vessel using a compatible NMEA 2000 display. The ACM100 is a key component of Maretron's N2KViewr vessel monitoring and control system.

Specifications for Maretron ACM100 Alternating Current Monitor:

Features of Maretron ACM100 Alternating Current Monitor

• Voltage
• Current
• Frequency
• Real Power
• Reactive Power
• Apparent Power
• Power Factor
• Total Energy Imported
• Total Energy Exported

Package Contents:

• Maretron ACM100 Alternating Current Monitor

30 Meter Cable Kit w/ Junction Box FI5001

Specifications for Furuno 30M Cable Kit w/Junction Box f/FI5001:

Package Contents:

• Furuno 30M Cable Kit w/Junction Box f/FI5001

The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other under-bolt temperature. The temperature range is -4 deg. F to 176 deg. F (-20 deg C to 80 deg C).

Specifications for Maretron Temperature Sensor f/ DCM100:

Package Contents:

• Maretron Temperature Sensor f/ DCM100

Exhuast Gas Temperature Probe (0C to 900C or 32 to 1652F)

Specifications for Maretron Exhaust Gas Temp Probe:

Package Contents:

• Maretron Exhaust Gas Temp Probe

The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM150 is capable of sensing gasoline tanks up to 24" in depth. Unlike most tank senders that only work with rectangular tanks the TLM150 can be calibrated for irregular tank shapes so you can know the true level of your tanks. It is desigend to operate within the harsh demands of the marine environment.

Specifications for Maretron TLM150 Tank Level Monitor:

Features of Maretron TLM150 Tank Level Monitor

• Load Equivalence # (LEN): 2

Package Contents:

• Maretron TLM150 Tank Level Monitor

Maretron's Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder along with a red high-brighness LED to indicate an alarm condition. A second green LED indicated that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts. The Alarm Module can be triggered by alarms generated by Maretron's N2KView Vessel Monitoring System or by Maretron's DSM250 Color Graphics Display. The Alarm Module mounts in a standard electric box or or can be flush mounted on any surface. Completely waterproof the Alarm Module can be mounted inside or outside the vessel.

Specifications for Maretron Alarm Module:

Package Contents:

• Maretron Alarm Module

1.5" NPT Displacement Hull Tank Adapter

Adapter from Maretron for displacement hull tanks.

Specifications for Maretron 1.5" NPT Displacement Hull Tank Adapter:

Package Contents:

• Maretron 1.5" NPT Displacement Hull Tank Adapter

Maretron SIM100 Switch Indicator Module continually monitors switch closure devices including but not limited to safety equipment (heat smoke carbon monoxide explosive vapor detectors) security systems (motion vibration glass break door and port hole magnetic switches) and vessel monitoring equipment (valve closed/open high water bilge). This Maretron GPS Accessory broadcasts information on NMEA 2000 network about the switch state so the crew can be alerted to potential conditions or problems that warrant further investigation. The Switch Indicator Module from Maretron is very versatile and can be used with Maretron supplied heat, smoke, acid gas, carbon monoxide, and bilge water detectors, as well as Maretron supplied magnetic switches, glass break detectors, door hatch and porthole magnetic switches, and clogged fuel filter detection (excessive vacuum). Maretron PI100 Switch Indicator Module monitors switch closure devices including heat, smoke, carbon monoxide, gas, filter/fuel siphon, and bilge water detectors.

Specifications for Maretron SIM100 Switch Indicator Module:

Features of Maretron SIM100 Switch Indicator Module

• Monitors and reports switch status
• Can detect and report problems like opens and shorts in switch circuits
• Compatible with Maretron Supplied: Heat detectors Smoke detectors Carbon monoxide detectors Bilge water detectors
• Also compatible with : Magnetic switches Glass break detectors Door hatch and porthole magnetic switches
• :
• Heat Detectors
• Smoke Detectors
• Carbon Monoxide Detectors
• Gas Detectors
• Bilge Water Detectors
• Magnetic Switches
• Glass Break Detectors
• Clogged Fuel Filter Detection (Excessive vacuum)
• Door Hatch and Porthole Magnetic Switches

Package Contents:

• Maretron SIM100 Switch Indicator Module

This tripod makes installation of your integrated sensor suite, Vantage Connect, special purpose station, repeater or shelter a snap. It can be used on the ground or on a rooftop. Brackets at the base of each leg tilt to mount on your roof or uneven terrain. The two included poles may be used separately or together.

Specifications for Davis Instruments Mounting Tripod:

Features of Davis Instruments Mounting Tripod

• Made of galvanized steel, Includes two 3' poles, Combined pole height creates one 5.8' pole, Designed for quick and simple installation

Package Contents:

• Davis Instruments Mounting Tripod

Style 399-1M VHF 6dB

Collinear Phased 5/8-wave with two coaxial chokes to suppress cable radiation

The Style 399-1M is the same as the 399-1 but it has a special sleeve for mast mounting. A professional quality antenna in a compact package. This extra-duty antenna combines strength and performance for use where you really need the efficiency of a large antenna but don't have room for one.

Brass and copper elements

Chrome-plated brass ferrule with standard 1"-14 thread

Aluminum sleeve for mast mounting

Suggested mount: 1-1/4" U-bolts are supplied. The 399-1M can be strapped to a larger mast using steel banding (not supplied)

Two sections: Base 75"; Tip 39" UPS shippable

Technical

Specifications for Shakespeare 399-1M 9'6" VHF Antenna:

Features of Shakespeare 399-1M 9'6" VHF Antenna

• Antenna Band: VHF
• Cable Length (Feet): 15'
• Cable Type: RG-58
• Color: White
• Construction: Fiberglass
• DB Gain (dB): 6 dB
• Ferrule Type: Chrome Plated
• Length (Inches): 9'6"

Package Contents:

• Shakespeare 399-1M 9'6" VHF Antenna

Shakespeare Style 5206-N VHF Marine - Reduced Length Version

8' LENGTH 6dB

END-FED WITH MATCHING STUB

Same as the Style 5206-C but the 5206-N has a nylon ferrule.

An economical and lightweight self-supporting antenna for good communications where range is not the predominant factor.

Quality copper cable elements for good range and efficiency

Nylon ferrule with standard 1"-14 thread

Includes 15' RG-58 cable and a PL-259 connector

Suggested mount: Shakespeare Style 495 Lift-n-Lay Mount or Style 4186 Ratchet Mount

Twin to: Shakespeare Styles 5205 and 5207 CB Marine antennas

One section

Shakespeare Limited Warranty: 2 years

Technical

Specifications for Shakespeare 5206-N 8' VHF Antenna:

Features of Shakespeare 5206-N 8' VHF Antenna

• Antenna Band: VHF
• Cable Length (Feet): 15'
• Cable Type: RG-58
• Color: White
• Construction: Fiberglass
• DB Gain (dB): 6 dB
• Ferrule Type: Nylon
• Length (Inches): 8'

Package Contents:

• Shakespeare 5206-N 8' VHF Antenna

Secure your antenna with this strong nylon ratchet mount. These mounts have a four-way ratchet design with handle for deck or side mounting. Mount is not intended for use with an antenna longer than 8' in self-supporting mode. Each mount has standard 1", 14-thread male ends. The bolt holes have a 5/16" diameter and are 3" x 1-1/2" on center.

Specifications for Shakespeare 4186BP/L206B Nylon Ratchet Mount:

Features of Shakespeare 4186BP/L206B Nylon Ratchet Mount

• Strong nylon ratchet mount, Four-way ratchet design with handle, Mount is not intended for use with an antenna longer than 8' in self-supporting mode, Standard 1", 14-thread male ends, Durable stainless steel construction

Package Contents:

• Shakespeare 4186BP/L206B Nylon Ratchet Mount

Shakespeare 5250-AIS Skinny Mini

3ft. VHF Marine Band 3dB

End-fed 1/2-wave stainless steel whip

Designed to meet the broader bandwidth requirements of all popular AIS transceivers this antenna mounts with ease. Its compact size will be welcome aboard any vessel. Chrome plated brass canister minimizes de-tuning.

Built for AIS transceivers

Sealed tin-plated copper wire coil

Stainless steel whip (36")

Requires mount with center hole for passage of the supplied 15' RG-58 cable.

One section

PL-259 connector included

Specifications for Shakespeare 5250-AIS 36" Low-Profile AIS Stainless Steel Whip Antenna:

Features of Shakespeare 5250-AIS 36" Low-Profile AIS Stainless Steel Whip Antenna

• Cable Type: RG-58
• Cable Length (Feet): 15'
• Antenna Band: VHF
• Color: Stainless
• Construction: Stainless Steel
• DB Gain (dB): 3dB
• Length (Inches): 36"

Package Contents:

• Shakespeare 5250-AIS 36" Low-Profile AIS Stainless Steel Whip Antenna

Shakespeare Style 5250 Skinny Mini

3 ft. (0.91 M) VHF Marine Band 3dB

End-fed 1/2-wave stainless steel whip

This compact lightweight antenna is ideal for vessels where space is limited - bass boats and fishing vessels for example. Its chrome plated brass canister minimizes de-tuning. Cable and PL-259 connector included.

Stainless steel whip

Sealed tin-plated copper wire coil

Requires mount with center hole for passage of the supplied 15' RG-58 cable.

One section

Specifications for Shakespeare Low Profile Skinny Mini VHF Antenna:

Features of Shakespeare Low Profile Skinny Mini VHF Antenna

• Cable Type: RG-58
• Cable Length (Feet): 15'
• Antenna Band: VHF
• Color: Stainless
• Construction: Stainless Steel
• DB Gain (dB): 3
• Ferrule Type: Stainless Steel
• Length (Inches): 36"

Package Contents:

• Shakespeare Low Profile Skinny Mini VHF Antenna

This universal adhesive kit contains everything you need to replace the adhesives on any model Dash Mount or Steelie phone sockets.

Features of Nite Ize Steelie Replacement Adhesive Kit for Dash Mount and Phone Socket

• This universal adhesive kit contains everything you need to replace the adhesives on any model Dash Mount or Steelie phone sockets.

Package Contents:

• Nite Ize Steelie Replacement Adhesive Kit for Dash Mount and Phone Socket

The Trail Pad Tablet looks and performs like a tablet, with HD images and videos filling the oversized 7-inch touch screen. But this isn't just any other tablet. It's a hunter's tablet specifically designed to cater to all your game tracking needs.

The weather-resistant viewer features dual, standard size SD card ports to sift through the hundreds of images and videos that every hunting season brings. Insert an SD card from your favorite trail cam into the library port to view every deer, hog and turkey in HD quality. When you like what you see, send it over to the archive. This stores the best of the best on a second SD card so you can easily keep tabs on a single animal or the entire herd. That's right: no more endless scrolling to find that one picture you want to show your buddy. Ultimate bragging rights are within view.

Specifications for Wildgame Innovations VU70 Trail Pad Tablet:

Features of Wildgame Innovations VU70 Trail Pad Tablet

• Oversized 7-inch HD backlitTFTtouch screen
• Zooms, swipes and navigates just like other tablet devices
• Dual SD card reader simplifies in-field file viewing and organization
• Primary port houses SD card with full library of images and videos
• Secondary port saves favorites to designated archive SD card
• Built-in speaker supports audio during video playback
• Compact, lightweight design
• Heavy-duty, water-resistant housing
• Holds two SD cards up to 32GB each (not included)
• Auxiliary and micro USB ports for computer and/or TV viewing (cords not included)

Package Contents:

• Wildgame Innovations VU70 Trail Pad Tablet

Extend your ride by connecting your Edge 1030 battery pack to another compatible Edge cycling computer with this adapter cable.

Specifications for Garmin Micro USB, B to Right Angle A Style USB, 70mm:

Package Contents:

• Garmin Micro USB, B to Right Angle A Style USB, 70mm

Bring a spare pack along with you and make sure you've got back-up power when and where you need it! Uses 4AA batteries (not included).

Specifications for Garmin Alkaline Pack, Rino7xx:

Package Contents:

• Garmin Alkaline Pack, Rino7xx