Boating & Marine

Turning Point Propellers H1-1013 Hustler 3-Blade Aluminum Propeller for 6-74hp Engines with 3.5" Gearcase is a right hand propeller and has a 10.5" diameter and a 13.5" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Specifications for Turning Point Propellers H1-1013 Hustler Aluminum:

Features of Turning Point Propellers H1-1013 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 25 - 75 hp Propellers w/ 3-1/2" GearcaseEngine Brand - 13 Spline PROP Shaft HUB PART #
• EVINRUDE / JOHNSON:4 stroke: 40hp 50hp1111300101
• FORCE: 40hp ('95-'98) 50hp ('95-'98) 70hp ('91-95') 75hp ('96-'98)1111300101
• HONDA:BF 4 stroke: 35 40 45 50 60hp (not P60)1211300200
• MERCURY & MARINER:2 stroke: 30hp ('94+) / 35 45 55/40 50 60 ('77+) / 70hp ('83-) 4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp1111300101
• NISSAN & TOHATSU: 40C 40D 50D 50C 60A 70A2 60B 70B1311300300
• PARSUN: T30 T35 T36 T401211300200
• SUZUKI: DT 2 stroke ('89+): 35C 40 50 50M 55 60 65hp DT 4 stroke: 40hp 50hp / ('10+): 40A 50A 60A 1111300101
• YAMAHA: 2 stroke: 40hp to 55hp 4 stroke: FT25hp High Thrust 30hp to 60hp1211300200

Package Contents:

• Turning Point Propellers H1-1013 Hustler Aluminum

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Specifications for VETUS Strainer f/Type FTR140:

Package Contents:

• VETUS Strainer f/Type FTR140

Turning Point Propellers R1-1013 Hustler 3-Blade Aluminum Propeller for 6-74hp Engines with 3" Gearcase is a right hand propeller and has a 10.125" diameter and a 13" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Features/Specifications:

3-Blade Hustler Series Aluminum Propeller, For 6-74hp Engines with 3" Gearcase, Right Hand Propeller, Diameter: 10.125"; Pitch: 13", Propeller Number: R1-1013

Specifications for Turning Point Propellers R1-1013 Hustler Aluminum:

Features of Turning Point Propellers R1-1013 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 9.9 - 35 hp Propellers w/ 3" GearcaseEngine Brand HUB PART #
• EVINRUDE / JOHNSON: (14 spline) 2 stroke; 20 25 ('84+) 25 commercial ('93-'05) 30 ('84+) 35 ('76-'05)/ E-Tec: 25hp 30hp / H.O.; 15hp2211200200
• FORCE: (10 spline) 25hp ('95-'98)2111200100
• MERCURY & MARINER: (10 spline) 2 stroke: 18hp ('80-'85) 20hp ('86 & Newer) 25hp ('85 & Newer) 4 stoke Bigfoot: 9.9hp 15hp2111200100

Package Contents:

• Turning Point Propellers R1-1013 Hustler Aluminum

Turning Point Hub Kit: 501

Specifications for Turning Point Propellers Hub Kit 501:

Package Contents:

• Turning Point Propellers Hub Kit 501

Set O-Ring & Cover for Waterfilter 330

Specifications for VETUS Set O-Ring & Cover f/Waterfilter 330:

Features of VETUS Set O-Ring & Cover f/Waterfilter 330

• Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainers
• Strainer size: 13 (33/64") to 38 mm (1-1/2")
• Note: Do not overtighten

Package Contents:

• VETUS Set O-Ring & Cover f/Waterfilter 330

Turning Point Propellers LE-1421 Hustler 3-Blade Aluminum Propeller for 40-300+hp Engines with 4.75" Gearcase is a right hand propeller and has a 14.25" diameter and a 21" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).

Features/Specifications:

3-Blade Hustler Series Aluminum Propeller, For 40-300+hp Engines with 4.25" Gearcase, Right Hand Propeller, Diameter: 14.25"; Pitch: 21", Propeller Number: LE-1421

Specifications for Turning Point Propellers LE1421 Hustler Aluminum:

Features of Turning Point Propellers LE1421 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 90-300+hp Propellers w/ 4-3/4" GearcaseEngine Brand - 15 spline PROP shaft HUB PART #
• EVINRUDE / JOHNSON:V4 with V6 large gearcase: 100hp commercial 120hp ('85) 130hp ('95-'96) 140hp ('85)Pleasure ('95&newer): 115hp 130hp / H.O.: 150 200 225 250hpE-TEC: (25" shaft) 90hp 115hp 130hp ('09-'10) / 135hp to 300hpV6: 135hp to 250hp / V8: 250hp to 300hp50211500200
• HONDA:BF115D BF135 BF150 BF200 ('02-'12) BF225 ('02-'12)50711500700
• HONDA:BF200 ('13&Newer) BF225 ('13&Newer) BF250 ('12&Newer)50811500800
• MERCURY & MARINER: Note: Does not fit Pro XSV6 135 to 300hp / Verado 135 to 275hp.OptiMax: 150 200 250hp50111500100
• MERCRUISER:Alpha One and Bravo One ('83&Newer)50111500100
• OMC:Cobra 800: 3.0 to 7.5L / King Cobra: 454 502 / Sea Drive: 2.0 to 4.0L50211500200
• SUZUKI:DT 2 stroke: 150hp to 225hp50711500700
• VOLVO PENTA SX & OMC SX COBRA: (19 spline)('94&Newer): 3.0 to 8.2LNot available for Volvo DuoProp or Aquamatic drives.50411500400
• YAMAHA:2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L50511500500

Package Contents:

• Turning Point Propellers LE1421 Hustler Aluminum

Replace your propeller housing with Turning Point's 11500400 MasterGuard Hub System Installation Kit #504 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Volvo Penta SX & OMC SX Cobra 90-300+hp 15-spline shaft engines with a 4.75" gearcase. Turning Point is the only company to offer MasterGuard Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.

Specifications for Turning Point Propellers Hub Kit 504:

Features of Turning Point Propellers Hub Kit 504

• Propeller Hub Installation Kit, 15-Tooth Spline Hub, Compatible with Hustler and Express Series Propellers, For select Volvo Penta SX & OMC SX Cobra 90-300+hp 15-spline shaft engines with a 4.75" gearcase, Refer to manufacturer recommendations to ensure a proper fit before purchasing

Package Contents:

• Turning Point Propellers Hub Kit 504

Neutral Button Kit for SICO & SISCO

Specifications for VETUS Neutral Button Kit f/SICO & SISCO:

Features of VETUS Neutral Button Kit f/SICO & SISCO

• Neutral Button Kit
• Specifically for VETUS SICO and SISCO

Package Contents:

• VETUS Neutral Button Kit f/SICO & SISCO

Replace your propeller housing with Turning Point's 11500200 MasterGuard Hub System Installation Kit #502 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Evinrude & Johnson and OMC 90-300+hp 15-spline shaft engines with a 4.75" gearcase. Turning Point is the only company to offer MasterGuard Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.

Specifications for Turning Point Propellers Hub Kit 502:

Features of Turning Point Propellers Hub Kit 502

• Propeller Hub Installation Kit, 15-Tooth Spline Hub, Compatible with Hustler and Express Series Propellers, For select Evinrude & Johnson and OMC 90-300+hp 15-spline shaft engines with a 4.75" gearcase, Refer to manufacturer recommendations to ensure a proper fit before purchasing

Package Contents:

• Turning Point Propellers Hub Kit 502

Avoid propeller failure and save your b oat's thigh when you install this Turning Point Propellers Hub Kit 503to replace your current one. These Boating & Marine by Turning Point Propellers are compatible with Hustler and Express Series Propellers and are designed for Evinrude & Johnson and OMC 40-150hp 15-spline shaft engines with a 4.25" gearcase. The Turning Point Propellers Hub Installation Kit is engineered to withstand wear and tear over time without the risk of spinning or failure under normal operational use, making it the best choice for such applications. Plus, these hubs are built to last which is why they're covered under the patented one-piece design mentioned earlier. Your engine will definitely thank you after several years of use! If you want to upgrade your current propeller housing, pick up a Turning Point Propellers Hub Installation Kit #503 and propel your boat to new heights.

Specifications for Turning Point Propellers Hub Kit 503:

Features of Turning Point Propellers Hub Kit 503

• Propeller Hub Installation Kit, 15-Tooth Spline Hub, Compatible with Hustler and Express Series Propellers, For select Evinrude & Johnson and OMC 40-150hp 15-spline shaft engines with a 4.25" gearcase, Refer to manufacturer recommendations to ensure a proper fit before purchasing

Package Contents:

• Turning Point Propellers Hub Kit 503

Replace your propeller housing with Turning Point's 11500500 MasterGuard Hub System Installation Kit #505 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Nissan & Tohatsu and Yamaha 40-150hp 15-spline shaft engines with a 4.25" gearcase. It is also compatible with Hustler and Express Series Propellers for select Yamaha 90-300+hp 15-spline shaft engines with a 4.75" gearcase. Turning Point is the only company to offer MasterGuard Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.

Specifications for Turning Point Propellers Hub Kit 505:

Features of Turning Point Propellers Hub Kit 505

• Propeller Hub Installation Kit, 15-Tooth Spline Hub, Compatible with Hustler and Express Series Propellers, For select Nissan & Tohatsu and Yamaha 40-150hp 15-spline shaft engines with a 4.25" gearcase, Refer to manufacturer recommendations to ensure a proper fit before purchasing

Package Contents:

• Turning Point Propellers Hub Kit 505

Turning Point Propellers H2-1117 Hustler 3-Blade Aluminum Propeller for 6-74hp Engines with 3.5" Gearcase is a right hand propeller and has a 11.75" diameter and a 17" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Specifications for Turning Point Propellers H2-1117 Hustler Aluminum:

Features of Turning Point Propellers H2-1117 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 25 - 75 hp Propellers w/ 3-1/2" GearcaseEngine Brand - 13 Spline PROP Shaft HUB PART #
• EVINRUDE / JOHNSON:2 cyl: 40hp 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp 65hp ('80-'85)3cyl. (with small gearcase): 75hp ('75-'85)Sprint and Formula E ('86-'92)1211300200

Package Contents:

• Turning Point Propellers H2-1117 Hustler Aluminum

Replace your propeller housing with Turning Point's 11500700 MasterGuard Hub System Installation Kit #507 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Honda and Nissan & Tohatsu 40-150hp 15-spline shaft engines with a 4.25" gearcase. It is also compatible with Hustler and Express Series Propellers for select Suzuki 90-300+hp 15-spline shaft engines with a 4.75" gearcase. Turning Point is the only company to offer MasterGuard Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.

Specifications for Turning Point Propellers Hub Kit 507:

Features of Turning Point Propellers Hub Kit 507

• Propeller Hub Installation Kit, 15-Tooth Spline Hub, Compatible with Hustler and Express Series Propellers, For select Honda and Nissan & Tohatsu 40-150hp 15-spline shaft engines with a 4.25" gearcase, For select Suzuki 90-300+hp 15-spline shaft engines with a 4.75" gearcase

Package Contents:

• Turning Point Propellers Hub Kit 507

Turning Point Propellers H1-1015 Hustler 3-Blade Aluminum Propeller for 6-74hp Engines with 3.5" Gearcase is a right hand propeller and has a 10.125" diameter and a 15" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Specifications for Turning Point Propellers H1-1015 Hustler Aluminum:

Features of Turning Point Propellers H1-1015 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 25 - 75 hp Propellers w/ 3-1/2" GearcaseEngine Brand - 13 Spline PROP Shaft HUB PART #
• EVINRUDE / JOHNSON:4 stroke: 40hp 50hp1111300101
• FORCE: 40hp ('95-'98) 50hp ('95-'98) 70hp ('91-95') 75hp ('96-'98)1111300101
• HONDA:BF 4 stroke: 35 40 45 50 60hp (not P60)1211300200
• MERCURY & MARINER:2 stroke: 30hp ('94+) / 35 45 55/40 50 60 ('77+) / 70hp ('83-) 4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp1111300101
• NISSAN & TOHATSU: 40C 40D 50D 50C 60A 70A2 60B 70B1311300300
• PARSUN: T30 T35 T36 T401211300200
• SUZUKI: DT 2 stroke ('89+): 35C 40 50 50M 55 60 65hp DT 4 stroke: 40hp 50hp / ('10+): 40A 50A 60A 1111300101
• YAMAHA: 2 stroke: 40hp to 55hp 4 stroke: FT25hp High Thrust 30hp to 60hp1211300200

Package Contents:

• Turning Point Propellers H1-1015 Hustler Aluminum

Turning Point Hub Kit: 11

Specifications for Turning Point Propellers Hub Kit 11:

Package Contents:

• Turning Point Propellers Hub Kit 11

Turning Point Propellers LE-1423 Hustler 3-Blade Aluminum Propeller for 40-300+hp Engines with 4.75" Gearcase is a right hand propeller and has a 14.25" diameter and a 23" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).

Specifications for Turning Point Propellers LE-1423 Hustler Aluminum:

Features of Turning Point Propellers LE-1423 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 90-300+hp Propellers w/ 4-3/4" GearcaseEngine Brand - 15 spline PROP shaft HUB PART #
• EVINRUDE / JOHNSON:V4 with V6 large gearcase: 100hp commercial 120hp ('85) 130hp ('95-'96) 140hp ('85)Pleasure ('95&newer): 115hp 130hp / H.O.: 150 200 225 250hpE-TEC: (25" shaft) 90hp 115hp 130hp ('09-'10) / 135hp to 300hpV6: 135hp to 250hp / V8: 250hp to 300hp50211500200
• HONDA:BF115D BF135 BF150 BF200 ('02-'12) BF225 ('02-'12)50711500700
• HONDA:BF200 ('13&Newer) BF225 ('13&Newer) BF250 ('12&Newer)50811500800
• MERCURY & MARINER: Note: Does not fit Pro XSV6 135 to 300hp / Verado 135 to 275hp.OptiMax: 150 200 250hp50111500100
• MERCRUISER:Alpha One and Bravo One ('83&Newer)50111500100
• OMC:Cobra 800: 3.0 to 7.5L / King Cobra: 454 502 / Sea Drive: 2.0 to 4.0L50211500200
• SUZUKI:DT 2 stroke: 150hp to 225hp50711500700
• VOLVO PENTA SX & OMC SX COBRA: (19 spline)('94&Newer): 3.0 to 8.2LNot available for Volvo DuoProp or Aquamatic drives.50411500400
• YAMAHA:2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L50511500500

Package Contents:

• Turning Point Propellers LE-1423 Hustler Aluminum

Rub Rail Mounted LED Navigation Light Set - 2-1/2"With constant innovation in mind we've developed a line of Rub Rail-mounted LED navigation lights sleek low-profile lights designed to allow for cleaner open decks with non-obstructed view points. Very popular with bay boats these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation have a water-resistant IP68 rating and provide hours of maintenance-free reliable use.

Specifications for TACO Marine Rub Rail Mounted LED Navigation Light Set:

Features of TACO Marine Rub Rail Mounted LED Navigation Light Set

• Ideal for boats up to 30'
• Brightness compares to 10-watt incandescent light
• Enables more deck space
• Easy to install
• Provides a 112.5-degree unobstructed view with less glare
• Meets ABYC/USCG requirements for both sail and powerboat designation
• Low-voltage 12-14VDC
• Anodized aluminum heat sink for maximum heat dissipation
• Water-resistant IP68 rating

Package Contents:

• TACO Marine Rub Rail Mounted LED Navigation Light Set

Polished Stainless Steel 2-19/64 Rub Rail End CapCaps rub rail to finish end of rail and ensure that inserts stay intact.

Specifications for TACO Marine Polished Stainless Steel 2-19/64’’ Rub Rail End Cap:

Features of TACO Marine Polished Stainless Steel 2-19/64’’ Rub Rail End Cap

• Caps rub rail to finish end of rail
• Ensures inserts stay intact
• Offers a finished look
• Stainless Steel Marine Grade 316
• Polished
• 5-Year limited warranty

Package Contents:

• TACO Marine Polished Stainless Steel 2-19/64’’ Rub Rail End Cap

Fixed Keeper for Pull to Open Latches - Stainless Steel

Specifications for Southco Fixed Keeper f/Pull to Open Latches:

Features of Southco Fixed Keeper f/Pull to Open Latches

• Material: Stainless Steel
• Southco offers modifications to our standard products explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Package Contents:

• Southco Fixed Keeper f/Pull to Open Latches

Concave Deck Hinge with Pin & Lanyard - Fits 7/8" Tube

Specifications for TACO Marine Concave Deck Hinge w/Pin & Lanyard:

Features of TACO Marine Concave Deck Hinge w/Pin & Lanyard

• Offered in concave and flat mounts
• Secure fit with removable pin and lanyard or turn and lock D-ring

Package Contents:

• TACO Marine Concave Deck Hinge w/Pin & Lanyard

Ball Catch Adjustable - 316 Stainless Steel

Specifications for Southco Ball Catch Adjustable:

Features of Southco Ball Catch Adjustable

• Material: 316 Stainless Steel
• Adjustable: Yes
• Southco offers modifications to our standard products explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Package Contents:

• Southco Ball Catch Adjustable

LE1/LE2-1321 Hustler Aluminum Propeller

Size: 13-1/4 x 21 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard for hub kit selection.

Incorporating the newest and most efficient design

Specifications for Turning Point Propellers LE1/LE2-1321 Hustler Aluminum:

Features of Turning Point Propellers LE1/LE2-1321 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 40-150hp Propellers w/ 4-1/4" GearcaseEngine Brand - Various spline PROP shafts HUB PART #
• EVINRUDE / JOHNSON: (13 spline shaft)2 cyl: 50hp ('71-'74) / 45 to 55hp commercial3 cyl: 55 60 65 70hp 75hp with large gearcase 65hp commercial4 cyl: 75 85 88 90 100 110 115 120 ('86-'94) 125 135 ('73-'76) 140 ('77-'84 '86-'94) / H.O.: 115hpE-TEC: 40 50 60 75hp / 20" shaft: 90 115hp 130hp ('09-'10)50311500300
• EVINRUDE / JOHNSON: (13 spline shaft)4 stroke: 60hp 70hp50611500600
• FORCE: (15 spline shaft)75hp ('99) / 90hp to 150hp ('95&Newer)50111500100
• HONDA: (15 spline shaft)('95-'98): 75hp 90hp50111500100
• HONDA: (15 spline shaft)P60 / 75hp 90hp ('99+) / 115hp 130hp (not 115D)50711500700
• MERCURY & MARINER: (15 spline shaft)2 and 4 stroke40 to 60 Bigfoot / 70 ('87-'89) / 75 80 ('78-'89) 90 100 115 125 140hp150 XR4/6 (thru 1993 includes equivalet Mariner Magnum I II III.)OptiMax: 75 90 115 125hp50111500100
• NISSAN & TOHATSU: (15 spline shaft)60C 70C / 90 to 140hp50511500500
• OMC: (13 spline shaft)Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L50311500300
• PARSUN: (15 spline shaft)T60 T75 T85 T9050011500000
• SUZUKI: (13 spline shaft)DT 2 Stroke ('89+): 75 to 140hpDF 4 stroke ('89-'09): 60hp 70hp50611500600
• YAMAHA: (15 spline shaft)High Thrust: T50 FT602 stroke: 60 to 100hp4 stroke: 70 to 100hp50011500000
• YAMAHA: (15 spline shaft)2 stroke: 115 to 130hp4 stroke: 115hp50511500500

Package Contents:

• Turning Point Propellers LE1/LE2-1321 Hustler Aluminum

Sliding Action Latch Weatherproof Lock Oval Stainless Steel

Specifications for Southco Sliding Action Latch Weatherproof Lock Oval Stainless Steel:

Package Contents:

• Southco Sliding Action Latch Weatherproof Lock Oval Stainless Steel

You need to see the TACO Marine Surface Mount LED Side Navigation Light Set for a clear understanding of how to operate your boat in low light environments. This boat light set manufactured by the experts at TACO Marine comes with a pair of 1-1/2" low-profile round lights that are mounted in a heavy-gauge polished stainless-steel cover for a clean and unobtrusive look. Engineered to meet ABYC-USCG requirements for both sail and powerboats, the TACO Marine Surface Mount LED Side Navigation Light Set is easy to install with marine adhesive sealants. The LED light is mounted in a heavy-gauge polished stainless-steel cover for a clean and unobtrusive look. For a great way to make sure you can safely navigate the waters, choose the TACO Marine Surface Mount LED Side Navigation Light Set.

Specifications for TACO Marine Surface Mount LED Side Navigation Light Set:

Features of TACO Marine Surface Mount LED Side Navigation Light Set

• Ideal for boats up to 40-feet long
• Provides reliable long-lasting LED lighting for thousands of hours of maintenance-free use
• 3-watt white LED with a low draw of only .6 amps that compares to 10-watt incandescent light
• Easy installation with marine adhesive sealants
• Designed to fit small transom areas
• Meets ABYC-USCG requirements for both sail and powerboat designation 2nm
• Low-voltage 12 to 24VDC
• Anodized cylindrical aluminum heat sink for maximum heat dissipation
• LED light is mounted in a heavy-gauge polished stainless-steel cover for a clean and unobtrusive look
• Water-resistant IP68 rating
• 1-year limited warranty

Package Contents:

• TACO Marine Surface Mount LED Side Navigation Light Set

Turning Point Propellers H1-1012 Hustler 3-Blade Aluminum Propeller for 6-74hp Engines with 3.5" Gearcase is a right hand propeller and has a 10.125" diameter and a 12" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Specifications for Turning Point Propellers H1-1012 Hustler Aluminum:

Features of Turning Point Propellers H1-1012 Hustler Aluminum

• Performance Upgrade to OEM & Aftermarket Propellers
• Squeeze Cast for Added Strength & Stainless Performance
• Tuned Vents for Fast Hole Shot
• Performance Tuned Rake and Progressive Pitch Angles
• Improve Handling and Boat Lift
• Long Lasting Finish
• 25 - 75 hp Propellers w/ 3-1/2" GearcaseEngine Brand - 13 Spline PROP Shaft HUB PART #
• EVINRUDE / JOHNSON:4 stroke: 40hp 50hp1111300101
• FORCE: 40hp ('95-'98) 50hp ('95-'98) 70hp ('91-95') 75hp ('96-'98)1111300101
• HONDA:BF 4 stroke: 35 40 45 50 60hp (not P60)1211300200
• MERCURY & MARINER:2 stroke: 30hp ('94+) / 35 45 55/40 50 60 ('77+) / 70hp ('83-) 4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp1111300101
• NISSAN & TOHATSU: 40C 40D 50D 50C 60A 70A2 60B 70B1311300300
• PARSUN: T30 T35 T36 T401211300200
• SUZUKI: DT 2 stroke ('89+): 35C 40 50 50M 55 60 65hp DT 4 stroke: 40hp 50hp / ('10+): 40A 50A 60A 1111300101
• YAMAHA: 2 stroke: 40hp to 55hp 4 stroke: FT25hp High Thrust 30hp to 60hp1211300200

Package Contents:

• Turning Point Propellers H1-1012 Hustler Aluminum

Swim Door Latch Polished 316 Stainless Steel - No Restriction

Specifications for Southco Swim Door Latch Polished 316 Stainless Steel:

Features of Southco Swim Door Latch Polished 316 Stainless Steel

• Material: 316 Stainless Steel
• Color/Appearance: Polished
• Access Restriction: No Restriction
• Operation: Right & Left In or Out
• Handle Style: Standard Style Handle

Package Contents:

• Southco Swim Door Latch Polished 316 Stainless Steel

Replace your propeller housing with Turning Point's 11200100 MasterGuard Hub System Installation Kit #21 with 10-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Force and Mercury & Mariner 9.9-35hp 10-spline shaft engines with a 3" gearcase. Turning Point is the only company to offer MasterGuard Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.

Specifications for Turning Point Propellers Hub Kit 21:

Features of Turning Point Propellers Hub Kit 21

• Propeller Hub Installation Kit, 10-Tooth Spline Hub, For select Force and Mercury & Mariner 9.9-35hp 10-spline shaft engines with a 3" gearcase, Refer to manufacturer recommendations to ensure a proper fit before purchasing

Package Contents:

• Turning Point Propellers Hub Kit 21

Offshore Swing Door Latch Key Locking

Specifications for Southco Offshore Swing Door Latch Key Locking:

Package Contents:

• Southco Offshore Swing Door Latch Key Locking

One-Piece Flexible Handle Latch Rubber/Stainless Steel Mount

Specifications for Southco One-Piece Flexible Handle Latch Rubber/Stainless Steel Mount:

Features of Southco One-Piece Flexible Handle Latch Rubber/Stainless Steel Mount

• Material: Rubber
• Material: Stainless Steel
• Finish: Natural
• Access Restriction: No Restriction
• Mounting Style: Front Mount
• Keeper Style: R
• Operation: Pull
• Series: 100 Series
• Latch Assembled: Yes
• Southco offers modifications to our standard products explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Package Contents:

• Southco One-Piece Flexible Handle Latch Rubber/Stainless Steel Mount

Large Stainless Steel Cup InsertThis 316 stainless steel cup insert fits 30 oz and 20 oz double wall vacuum

sealed stainless steel cups and tumblers (Yeti Tervis Engel etc.)

Specifications for Tigress Large Stainless Steel Cup Insert:

Package Contents:

• Tigress Large Stainless Steel Cup Insert